Features
Technical specifications
| Type | Manual belt-drive turntable with external speaker system |
| Speeds | 33-1/3 & 45 RPM |
| Supported Record Sizes | 7", 10", and 12" vinyl records |
| Drive System & Motor | Belt-drive system with DC motor for stable, low-vibration rotation |
| Cartridge & Stylus | Audio-Technica AT3600L with replaceable stylus for accurate groove tracking and long-term reliability |
| Audio Output & Connectivity | Bluetooth input & output (cannot operate simultaneously), RCA output for external audio expansion, 2 × 20W external speakers (non-Bluetooth) for dedicated stereo sound. |
| Controls & Setup | Manual operation with adjustable counterweight, Recommended tracking force: 3.5 ± 0.5g for balanced playback and groove protection |
| Playback Protection | Auto-stop function stops platter at end of record playback |
| Dimensions & Weight | Turntable: 14.09" × 16.42" × 4.92" / Speakers: 6" × 6" × 9" / Total weight: 20.72 lb / 9.4 kg |
Frequently Asked Questions
-
Switch the UD006 to Bluetooth input mode, then pair your smartphone, tablet, or computer with the turntable. Make sure the turntable is connected to the included speakers via RCA cables, then your Bluetooth music will play through the speakers.
-
The UD006 supports most standard Bluetooth speakers and headphones for wireless vinyl playback. However, some high-power speakers and speakers that rely on proprietary app-based ecosystems may not support direct Bluetooth pairing. For these systems, use the UD006’s RCA output for a wired connection.
-
No. The UD006 switches between Bluetooth input and Bluetooth output modes. Select Bluetooth input to stream music from your phone or other device, or Bluetooth output to send vinyl audio to compatible Bluetooth speakers or headphones.
-
Yes. The UD006 has a built-in amplifier and phono preamp, so the included 2×20W speakers can connect directly to the turntable via RCA cables. No separate amplifier or receiver is required.
Set the switch to LINE when using the included speakers or connecting to powered speakers or an amplifier with a LINE-level input. Use PHONO only when connecting the turntable to an external amplifier or phono preamp that requires a phono-level signal. -
No. The included speakers connect to the turntable with RCA cables. Bluetooth is built into the turntable for wireless audio input and output.
-
No, this is a fully manual turntable, meaning the tonearm does not automatically return or lift at the end of playback. You will need to manually lift and return the tonearm when the record finishes.
-
When properly balanced and used with clean records, the UD006 is designed for record-friendly playback. The included MM cartridge and adjustable tracking force allow the stylus to track the record groove properly. Keep your records and stylus clean, and avoid playing heavily damaged or warped records.
-
Balance the tonearm first according to the user manual, then set the tracking force to the recommended range for the installed cartridge. If you experience skipping, check the tonearm balance, tracking force, stylus condition, record condition, and turntable placement before increasing the tracking force. 【How to Adjust the Counterweight on the Retrolife UD006 Record Player】